| 412-277-4443 (8am to 3pm est) | NZ Designs Inc

Single Post Handrail for Stairs for 1 to 2 Steps | Baseplate Post For Surface Mount


We are excited to introduce best selling product the Single Post EZ rail.  This rail is perfect if you need a little help up one or two steps.

Product Finish * 


  • Designed for use with a step having about a 7 inch rise. Suitable for steps 5 – 8 inches. The base plate and heavy bottom tube are designed to take the extra stress of having only a single post. The top rail is about 18 inches long. It bends to give added usability.
  • The post is 1 x 1 inch thick wall steel tube–inside of a 12 inch section of 1 1/2 square tube. These are fused together with decorative cast iron parts at the transition points.
  • The plate is 3/8 x 6 x 4 inch–the post is welded into a 1 inch square hole and again to the 1 1/2 tube.  Needless to say this rail is very stout and most of the visible welds are covered by an attractive cast steel cover.
  • There is nothing to assemble!  The rail is one solid piece weighing in at 20 pounds!
Installation:  This couldn’t be simpler.  The rail mounts to the center of a step or right before a single step up. You will need a hammer drill and bit capable of drilling a 3/8 hole. We provide you with the concrete anchors you will need. Not recommended for most brick or stone surfaces unless they are extremely secure.
Options:  You can opt for a longer post that embeds into the ground. (Separate listing)  100 lbs of concrete recommended. Also you need close to 18″ in the ground so you can only use this option if the ground is close to the height of the step or walk.
Paint:  We use a fast drying automotive quality primer.  You will need to finish paint with spray or brush on paint.  Enamel or Latex paint is acceptable.  Harder finishes are preferred to prevent scratches.
Weight 18 lbs
Dimensions 43 × 17 × 5 in
  • No products in the cart.